Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

TB shoot out long
TB shoot out long
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 1st August 2003, 07:18 PM   #1
RAW is offline RAW  Canada
diyAudio Member
Join Date: Jul 2002
Location: British Columbia ,Canada
Default TB shoot out long


Ok I finally got some time to start getting into MLSSA and measuring the TB 3" drivers.
http://www.earthwks.com/ns/preamps.html modle 1021
Ok all of the measurments were taken with the mic 5ft off the floor stationary.
Distance to speaker from Mic was 2ft.
In the cabinets below.
6.5 (W) X 7.5 (H) X 7.25 (D)
with a 1" port 3/4 long.
A piece of insluation 15" long on the top,back and bottom only.

The MCM 606 was made as they dropped the TB line a while back and had a demand for the 319S1 which they could not get.So they had Lyeco make these.A steller unit to say the least.

The Models I have not measured in the cabinet but will.The W3-593S and W3-594S
As these are the modles that both Nuera and PE had made into a round frame and the W3-871S and the W3-879S was made from them.

The W3-881S PE had seen the W3-532S but wanted a round frame for the DIY.
Well not bad little driver just a little shy in the top end as you can see.
The difference between the 879 and the 871.
Large in responce as you can see but they are also differnt drivers completely.
The 879S has a different spyder,cone cone angle and phase plug lenght and shape over the 871S.
Yes cnot even close in anyway shape or form.

I did these to show you all that realy for the money any one of these will please your tastes just how high you can listen.
I have used these all as a fullrange no filter what so ever.Nothing.
The thing I am going to do is the 1.5 cabinets just installing the drivers above in pairs and using Jim Griffins designed 1.5 filter.
A 1.5mH and a 5.6 resistor.
This will be to show all those with making the 1.5 with other drivers other than the 871S what they will get in a responce.

Click the image to open in full size.
  Reply With Quote


TB shoot out longHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Amazing opamp measurement shoot-out KSTR Solid State 60 7th December 2012 05:26 PM
SWR t-shoot question ReldvS Solid State 3 10th August 2009 11:01 PM
Aleph 2 photo shoot. Luke Pass Labs 21 20th December 2003 05:00 PM
TB/MCM 8" shoot out RAW Multi-Way 2 20th October 2002 02:52 AM

New To Site? Need Help?

All times are GMT. The time now is 10:51 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio