help wiring crossover

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
this is my first DIY project. and am not to familiar with how the crossovers are suppose to be connected inside the enclosure. i am using an sdx 7 fr125s and a visaton g20sc as super tweeter i ordered from solen and they built me the crossovers. i dont have a picture of them completed but on 2 seperate pcb's the fr125s crossover consists of 7.5mH inductor, 18mfd cap. the sdx7 crossofver was 39mfd cap, 43mfd cap, 6.8mH inductor 7.5ohm resistor. and for the tweeter a 2.7mfd cap. the pcbs are in the pictures. i am not to sure how everything should be wired together. any help is appreciated and thanks in advance
 

Attachments

  • pcblpf.jpe
    pcblpf.jpe
    22.1 KB · Views: 56
  • pcbhpf.jpe
    pcbhpf.jpe
    17.5 KB · Views: 64
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.