Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Help with a two way open baffle hybrid
Help with a two way open baffle hybrid
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th February 2011, 07:08 AM   #1
el capitan is offline el capitan  United States
diyAudio Member
 
Join Date: May 2010
Default Help with a two way open baffle hybrid

My plan is to make a 2 way design with four of these in parallel for 4 ohms in an open baffle line array because of their high qts. They would have a sensitivity of 94 dB.

I also intend to use either one of these in a ported enclosure 0.6 cu ft with a 2" diameter port by 5" long to reach 45 Hz with a sensitivity of 86 dB or one of these in a ported enclosure of 1.3 cu ft for an f3 of 55 hz or so with a sensitivity of 93 db.


The first question I have concerns the baffle. Is there an accurate way to calculate baffle size to attain a certain frequency? Ideally I want the natural extension of the fullrange to go 20 to 30 Hz below the crossover point. Given that the fullrange's fs is 135 Hz, is it reasonable to expect to have them flat to 150 Hz with the open baffle, then cross over to the woofer at 170 or 180 Hz. Also, does the baffle have to be flat? I have read about H frames and U frames, and it seems like it is a space efficient way to get lower response.

My other question is about the crossover. I have read some other threads and I got several answers, but do I need any baffle step correction in the network?

Thanks to all for your advice,
Alex
  Reply With Quote

Reply


Help with a two way open baffle hybridHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Does open baffle suffer from baffle step? 454Casull Multi-Way 15 19th May 2012 04:12 PM
Vented / Open baffle hybrid design and ideas Spike415 Multi-Way 2 23rd September 2010 06:53 PM
Anyone seen plans for an open baffle ribbon hybrid? wongstein Planars & Exotics 6 29th April 2009 10:46 AM
what effect does baffle have on open-baffle system? kappa546 Multi-Way 6 24th January 2006 11:21 PM
Australians- what solid timbers for baffle? (open baffle loudspeaker) tktran Multi-Way 13 30th November 2004 12:09 AM


New To Site? Need Help?

All times are GMT. The time now is 10:06 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki