Eton 2u XXL

Tiroler · 26th December 2010, 08:55 PM

Hi,
I just want to show some pictures of the speakers that I have finished lately. The tweeter is the Eton ER4 band ribbon driver, mid/woofer chassis are Eton 7-375/32 Hex. Udo Wohlgemuth is the designer of this speaker named Eton 2u XXL.
The cabinets have sandwiched side panels of thin MDF and 30mm slate plates. This gives a total weight of 65,6 kg or 144,623 pounds.
Best regards,
Martin

McCormack · 27th December 2010, 02:41 PM

How do you like those Eton 7-375's? And I think you made a typo - it would take a crane to move speakers that weighed 144,623 pounds. :>)

jackies · 02:59 PM

Outside of the US comma is commonly used as a decimal point. Go figure...
Nice Looking speakers though!
Whats the crossover frequency?

Tiroler · 27th December 2010, 03:05 PM

These Eton’s are good chassis in my opinion. Yes, I am sorry, it’s 144 pounds and little... can you let me know where the “edit” button is? The crossover point is at 2.6 kHz, here is my webalbum

Helmuth · 27th December 2010, 03:17 PM

Great build Martin,

I would like to hear the eton air-motion transformer. But austria is a bit out of range.

Have fun with it.

Tiroler · 28th December 2010, 07:49 AM

Helmuth, thanks for your nice comment. The developer/seller of this speaker lives quite close to you! Just a little over 100 km in Bochum, the shop is open from Monday to Wednesday, 15.00 - 20-00 or by appointment. Acoustic Design Magazin In case you visit the shop, please let me hear about your impressions!
Martin

27th December 2010, 02:55 PM	#3
jackies diyAudio Member Join Date: Nov 2007	Outside of the US comma is commonly used as a decimal point. Go figure... Nice Looking speakers though! Whats the crossover frequency? Last edited by jackies; 27th December 2010 at 02:59 PM.

27th December 2010, 03:17 PM	#5
Helmuth diyAudio Member Join Date: Oct 2008 Location: Winterswijk	Great build Martin, I would like to hear the eton air-motion transformer. But austria is a bit out of range. Have fun with it. __________________ ( (( KUGELWELLE )) ) recent projects :OB-mk1 /fatboy / monitor-xl / Horn-AM / dappolito / td124-mk1-rb301 / Hybrid-pse / Vfet

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saba Alnico XXL woofer 12"	thomaseliot	Multi-Way	4	4th August 2010 07:44 PM
FS: Eton 8-800 (pair), Eton 8-472 and custom speakers	Jimmy154	Swap Meet	14	3rd June 2010 06:48 PM
2U Pro enclosures	Professor smith	Pass Labs	3	23rd April 2009 04:52 PM
WTB: 2U chassis	DcibeL	Swap Meet	14	16th December 2006 01:06 AM
2U rack cases	len_scanlan	Swap Meet	0	12th January 2005 10:06 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th December 2010, 02:41 PM	#2
McCormack diyAudio Member Join Date: Mar 2006 Location: SE Wis	How do you like those Eton 7-375's? And I think you made a typo - it would take a crane to move speakers that weighed 144,623 pounds. :>)

27th December 2010, 03:05 PM	#4
Tiroler diyAudio Member Join Date: Jan 2010 Location: Austria	These Eton’s are good chassis in my opinion. Yes, I am sorry, it’s 144 pounds and little... can you let me know where the “edit” button is? The crossover point is at 2.6 kHz, here is my webalbum

28th December 2010, 07:49 AM	#6
Tiroler diyAudio Member Join Date: Jan 2010 Location: Austria	Helmuth, thanks for your nice comment. The developer/seller of this speaker lives quite close to you! Just a little over 100 km in Bochum, the shop is open from Monday to Wednesday, 15.00 - 20-00 or by appointment. Acoustic Design Magazin In case you visit the shop, please let me hear about your impressions! Martin

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)