60 x 60 conical horn

audiothings · 12:35 PM

Where can I get a 60 x 60 horn like this one... should go down to 1.2 KHz, preferably less. Thank you.

I saw the Dayton horn... closest I could find. Lowest recommended frequency is 1.2 KHz, which is cutting it too fine for my comfort.

Steve Eddy · 17th November 2010, 02:39 PM

Peavey makes a 60 x 60 conical.

Peavey CH-6

And I believe Bill Woods' conicals are 60 x 60, though very pricey.

Acoustic Horn

Good luck!

se

nullspace · 17th November 2010, 03:07 PM

I have a pair of Bill's AH!1000 (pictured in Steve's post). They're 50deg. and they do fine down to 1kHz. He also sells the AH!700 (60deg. conical) which will work down to 700Hz. Very nice, but as Steve said pricey.

Though not a conical, you might check out the 18sound XT1464. Narrow coverage (60deg. x 50deg.) and looks pretty good to me: XT1461.

Regards,
John

audiothings · 18th November 2010, 12:20 AM

Wow, those AHs look like works of art... and priced likewise!

The Peavey and 18sound are more likely candidates for me.

Thanks guys.

17th November 2010, 12:30 PM	#1
audiothings diyAudio Member Join Date: Aug 2005	60 x 60 conical horn Where can I get a 60 x 60 horn like this one... should go down to 1.2 KHz, preferably less. Thank you. I saw the Dayton horn... closest I could find. Lowest recommended frequency is 1.2 KHz, which is cutting it too fine for my comfort. Last edited by audiothings; 17th November 2010 at 12:35 PM.

17th November 2010, 02:39 PM	#2
Steve Eddy diyAudio Member Join Date: Sep 2002 Location: Sacramento, CA	Peavey makes a 60 x 60 conical. Peavey CH-6 And I believe Bill Woods' conicals are 60 x 60, though very pricey. Acoustic Horn Good luck! se __________________ The Audio Guild

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Peavey Classic 60/60 bias mod advice	RIC	Tubes / Valves	6	3rd September 2012 10:05 PM
Very much the Schematic on LITE DAC-60-60 is required	Sergio69	Digital Line Level	0	19th January 2010 07:56 PM
Yamaha M-60 power amp for sale (w/ impaired C-60 preamp)	rainzoneman	Swap Meet	10	3rd December 2009 01:44 PM
Sola Transformer 95-130 VAC In 118 VAC Out 60 VA 60 HZ	Scott Novak	Swap Meet	1	18th April 2009 10:24 AM
can I tone control the Peavey Classic 60/60	RIC	Tubes / Valves	2	24th March 2005 04:27 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th November 2010, 03:07 PM	#3
nullspace diyAudio Member Join Date: Oct 2004 Location: Phila., PA	I have a pair of Bill's AH!1000 (pictured in Steve's post). They're 50deg. and they do fine down to 1kHz. He also sells the AH!700 (60deg. conical) which will work down to 700Hz. Very nice, but as Steve said pricey. Though not a conical, you might check out the 18sound XT1464. Narrow coverage (60deg. x 50deg.) and looks pretty good to me: XT1461. Regards, John

18th November 2010, 12:20 AM	#4
audiothings diyAudio Member Join Date: Aug 2005	Wow, those AHs look like works of art... and priced likewise! The Peavey and 18sound are more likely candidates for me. Thanks guys.