Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Alternate approach to an Eminence 15A alpha 2-way?
Alternate approach to an Eminence 15A alpha 2-way?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 25th October 2010, 01:22 PM   #1
Brisso57 is offline Brisso57  Australia
diyAudio Member
Brisso57's Avatar
Join Date: Sep 2005
Location: the leafy west of Brisbane
Default Alternate approach to an Eminence 15A alpha 2-way?

OK. I'm suggesting replacing the FR in the MJK design with a tweeter that goes LOW.

Here is the spec sheet for the Eminence 15A alpha:

You can see the response runs pretty flat up to ~1kHz, before kicking up.

Here is a spec sheet for a Wavecor tweeter, the TW030WA02:
4 Ohm - Ferro - TW030WA02 - Soundlabs Group

You can see this tweeter runs pretty low! Check out the response curve.

The sensitivity is quite high: 94.5dB
The power handling is good: ~35W nominal.

Does anyone think that this tweeter could be successfully mated with the 15A to make a successful OB? Maybe using steeper XO slopes? or even digital XO?

Plus: Look at the top-end sizzle on tap! (You'll never need a supertweeter!)
Plus: The low cost of the tweeter.
Minus: Crossing the 15A higher, but perhaps not that much, as the tweeter goes low. (ie Risking incurring "the wrath" for suggesting XO'ing inside the telephone band!)

Consensus please? Is this worth trying?


A speaker-builder's parable: "That burned down, fell over, then sank into the swamp. But the fourth one stayed up. And that's what you're going to get, Lad, the strongest castle of all."
  Reply With Quote
Old 25th October 2010, 01:48 PM   #2
picowallspeaker is offline picowallspeaker  Italy
diyAudio Member
picowallspeaker's Avatar
Join Date: Apr 2007
I don't think it is a good idea . sorry
The idea of using a tweeter may be good in a 3 way setup ,so the littler the emitting area ,the narrower the beaming . Changing abruptly from a big woofer to a little dome brings problems in directivity . Then ,moreover ,it is not a dipole !!
  Reply With Quote
Old 25th October 2010, 01:52 PM   #3
chris661 is offline chris661  United Kingdom
diyAudio Member
chris661's Avatar
Join Date: Feb 2008
Location: Sheffield
You'd be running very close to the Fs of the tweeter if you want to cross at 1kHz. You'd likely run into problems - the usual rule is to keep it around an octave above resonance. If a THD curve showed it was fine to go down there at reasonable levels, then it might be worth a go.

Apart from that, you'd be attempting to match up a dipole bass system with a monopole mid-high. This, too, would likely cause some problems, which is why most people tend to use a FR driver: they have some rear-ward radiation, matching the bass driver.
My work: www.grimshawaudio.com
  Reply With Quote


Alternate approach to an Eminence 15A alpha 2-way?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Jim Shearer's Fostex FF85K and Eminence Alpha 15A Open Baffle Speaker MJK Full Range 114 30th August 2011 06:13 PM
Wanted Pair of Eminence Alpha 15A woffers woody Swap Meet 2 29th December 2009 12:50 PM
Does anyone have nearfield measurements of an Eminence Alpha 15A? Saurav Multi-Way 8 20th June 2008 12:45 AM
For Sale : Eminence Alpha 15A barackuda Swap Meet 2 23rd October 2007 02:07 PM
FS: Eminence Alpha 15A x 4 jeff mai Swap Meet 5 15th April 2007 05:40 AM

New To Site? Need Help?

All times are GMT. The time now is 08:02 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio