|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Oct 2008
|
I want to use this down to 2k in a budget HT setup.
Replacement Tweeter for CS-2516 - Jaycar Electronics Any opinions on it? It is a replacement for the 12" CS2516 foldbacks. 12" Foldback Speaker - Jaycar Electronics |
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Feb 2002
Location: Sydney
|
I know they're cheap, but I'd steer away from using piezos that low. Crossed over properly, they're good from ~ 4KHz or so & up. For a 2 way, I'd stick with a conventional tweeter, this one is good value
HiVi K1 [K1] - $29.00 : Darcher Audio
__________________
‘today… there lives alongside the twentieth century the tenth or thirteenth. A hundred million people use electricity and still believe in the magic power of signs and exorcisms” Trotsky |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| do piezo compression drivers have an impedience | tuneman | Planars & Exotics | 3 | 18th September 2010 11:10 PM |
| Jaycar/Silicon chip Studio 350 opinions? | Optical | Solid State | 18 | 11th March 2009 05:45 AM |
| 4" Seas long throw woofs, Motorola piezo compression drives, TangBand 2" widebands | mr_ro_co | Swap Meet | 4 | 15th April 2008 01:16 AM |
| FS: Silver Iris Coaxial 15" driver pair (sans XO and compression driver) | theAnonymous1 | Swap Meet | 0 | 24th April 2007 12:09 AM |
| Piezo compression | Pbassred | Multi-Way | 4 | 18th November 2004 06:01 PM |
| New To Site? | Need Help? |
| Page generated in 0.12138 seconds (38.14% PHP - 61.86% MySQL) with 11 queries |