diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   wharfedale super 12 rs dd parameters (http://www.diyaudio.com/forums/multi-way/171312-wharfedale-super-12-rs-dd-parameters.html)

cone head 4th August 2010 01:09 PM

wharfedale super 12 rs dd parameters
 
Hi does anyone know the T/S parameters of the wharfedale super 12 rs dd, or good cabinet designs? :spin:

kevinkr 4th August 2010 05:58 PM

I had a pair of the Super 8 RS DD which I ultimately sold to a fellow in Italy to repair a vintage pair of Wharfedale speaker systems where it was used as the midrange driver. I never did anything with mine as I received a pair of Fostex FE167 for my birthday which I subsequently used to build a pair of Half Chili Changs.

Some information on the Super 8 RS DD that may also be applicable to the Super 12 RS DD here: Super 8 RS DD

Some relevant documentation here: Wharfedale 1962 brochures and handouts

You might want to look at this thread as well:
http://www.diyaudio.com/forums/full-...dspeakers.html

I haven't found ts parameters for the Super 12 RS DD anywhere, but have not looked hard either.

Sreten has a lot of comments on the Wharfdale Super 8/10/12 RS DD family that you would probably be wise to heed. Others disagree, but these drivers particularly in the Rank/Wharfedale era appear to be deeply flawed.


All times are GMT. The time now is 07:06 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2