diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   Box dimensions for in-wall Polk speakers? (http://www.diyaudio.com/forums/multi-way/170576-box-dimensions-wall-polk-speakers.html)

rabbitsincars 21st July 2010 01:34 PM

Box dimensions for in-wall Polk speakers?
 
Hi Guys,

I tried emailing Polk to get specs to build boxes for the RC55i and RC85i as they are going to be hung on broad cement columns, and they only replied that I should use a 1.5 cubic foot box. Didn't specify if it was ported, length of port, etc. or supply me with basic specs to use to calculate. I am asking if anyone here would be willing to hazard a guess as to what size for each for a lightly stuffed closed box.

RC55i Specs Page : 5.25" two-way in-wall rectangular loudspeaker : Polk Audio

RC85i Specs Page : 8" two-way rectangular in-wall loudspeaker : Polk Audio

I know it is only a guess, and I would say erring on the side of a little too small with a slight bass hump but better power handling might be better.

Thanks.

rabbitsincars 22nd July 2010 03:52 PM

One bump, then let the question go gentle into that good night.


All times are GMT. The time now is 01:35 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2