|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
8th July 2010, 11:50 PM
|
#1 |
|
diyAudio Member
Join Date: Jul 2006
|
Quick Felt Clearance Question
I'm trying to decide if I should trim back the felt. From the front plane of the speaker there is 3" to the side of the felt, 3.5" to the inductor. The driver for reference is about 2.5" in the same dimension. For reference, it's about 3" between the two felt sides and the magnet on the driver is about 3.25" diameter. Seems like there is enough clearance?
Pics:   
|
|
|
9th July 2010, 01:16 AM
|
#2 |
|
diyAudio Member
Join Date: Mar 2004
Location: Melbourne, Australia
|
In your picture it looks a bit close.
I would trim back an itch, or perhaps take off the inner edge of the felt for a more "aerodynamic" profile . |
|
|
|
10th July 2010, 05:25 PM
|
#3 |
|
diyAudio Member
Join Date: Jul 2006
|
thanks David! Your expert opinion is greatly appreciated.
I got one up just now 
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Quick quick question ! | guitvinny | Pass Labs | 6 | 7th February 2007 04:20 PM |
| Question: What type of Felt does Duntech use for their Front Baffle? F11/F13/F26 or ? | dtm1962 | Multi-Way | 0 | 16th October 2006 09:58 PM |
| VERY quick question... | Wyloch | Multi-Way | 2 | 3rd March 2005 04:34 PM |
| Quick X-over question | DerekB1 | Multi-Way | 1 | 17th January 2005 07:29 PM |
| New To Site? | Need Help? |
| Page generated in 0.06975 seconds (67.75% PHP - 32.25% MySQL) with 10 queries |
