Hi, all.
Pair of Goodmans Dimension 8 speakers for overhaul.
Two of the 4 tweeters are dead but still sounding pretty cool !!
1" soft dome in a kind shallow horn loading faceplate.
Units are Goodmans made, marked DT3.
They are crossed over at 4kHz.
Efficiency: dunno.
Looking for advice on a modern sensibly priced equivalent (i'll want to do all 4).
Or any info that might help narrow down the field greatly received.
Thanks in advance.
Pair of Goodmans Dimension 8 speakers for overhaul.
Two of the 4 tweeters are dead but still sounding pretty cool !!
1" soft dome in a kind shallow horn loading faceplate.
Units are Goodmans made, marked DT3.
They are crossed over at 4kHz.
Efficiency: dunno.
Looking for advice on a modern sensibly priced equivalent (i'll want to do all 4).
Or any info that might help narrow down the field greatly received.
Thanks in advance.
I'm finding a little info on the net regarding these Dimension 8's but still a bit stuck with what to replace the DT3 tweeters with (particularly since I'm not sure what the target sensitivity is).
However, I have found a website with what looks like a scan of an original brochure.
The specification quotes:
"Sensitivity (DIN) 4.4 Watts"
I've not seen this method of characterising sensitivity before - anyone have any idea howto convert this to the more "useful" dB/W/m.
Any help gratefully received.
However, I have found a website with what looks like a scan of an original brochure.
The specification quotes:
"Sensitivity (DIN) 4.4 Watts"
I've not seen this method of characterising sensitivity before - anyone have any idea howto convert this to the more "useful" dB/W/m.
Any help gratefully received.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.