Easy, simple to use software for measuring FR, impulse, etc?

makingmoney · 4th July 2010, 05:44 PM

I 'd like to get some recommendations for simple, easy to use, inexpensive software for FR measurements, etc.

I'd like to reduce the peaks and dips in the FR and xover points. Nothing to exotic.

Also mics, power supply, any thing else that I would need to make a somewhat hassle free experience for a non engineering type (me!).

Thanks.

aczern · 4th July 2010, 06:17 PM

ARTA Download

Brett · 4th July 2010, 06:41 PM

HOLMImpulse, a Dayton EMM6 mic from PE, a Behringer Xenyx 802 and appropriate cables.

planet10 · 4th July 2010, 07:25 PM

Quote:

Originally Posted by Brett

a Dayton EMM6 mic from PE

plus calibration.

I use Fuzzmeasure.

dave

Brett · 4th July 2010, 07:31 PM

Quote:

Originally Posted by planet10

plus calibration.

It comes with a cal file.
EMM6 or you can get one from Cross Spectrum if you want to spend more.

planet10 · 4th July 2010, 10:34 PM

The cal file came with mine was not near as good as the one came from cross-spectrum.

dave

freddi · 4th July 2010, 10:39 PM

a decent plastic/whatever turntable to rotate the speaker under test

dbaudio · 6th July 2010, 09:45 AM

Try low cost, easy, accurate "Monitor" software with calibrated mic level meter < $100

4th July 2010, 05:44 PM	#1
makingmoney diyAudio Member Join Date: Nov 2008	Easy, simple to use software for measuring FR, impulse, etc? I 'd like to get some recommendations for simple, easy to use, inexpensive software for FR measurements, etc. I'd like to reduce the peaks and dips in the FR and xover points. Nothing to exotic. Also mics, power supply, any thing else that I would need to make a somewhat hassle free experience for a non engineering type (me!). Thanks.

4th July 2010, 10:34 PM	#6
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 4	The cal file came with mine was not near as good as the one came from cross-spectrum. dave __________________ community sites t-linespeakers.org, frugal-horn.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HOLMImpulse: Measuring Frequency- & Impulse-Response	askbojesen	Software Tools	759	20th November 2011 05:42 PM
Measuring tweeter FR without a highpass filter	owdi	Multi-Way	3	14th March 2007 05:40 AM
IDEA: Measuring FR of a driver with room acoustics?	Rarkov	Everything Else	10	22nd April 2003 05:25 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th July 2010, 06:17 PM	#2
aczern diyAudio Member Join Date: May 2008 Location: Poland	ARTA Download

4th July 2010, 06:41 PM	#3
Brett diyAudio Member Join Date: Jan 2002	HOLMImpulse, a Dayton EMM6 mic from PE, a Behringer Xenyx 802 and appropriate cables.

4th July 2010, 10:39 PM	#7
freddi diyAudio Member Join Date: Aug 2005	a decent plastic/whatever turntable to rotate the speaker under test

6th July 2010, 09:45 AM	#8
dbaudio diyAudio Member Join Date: May 2003 Location: Cranberry Twp., Pa. 16066	Try low cost, easy, accurate "Monitor" software with calibrated mic level meter < $100

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)