I have a couple of Lancaster with M.G. 12 "and I decided to give them new life. On the net I found a project to build a cabinet with horn-loaded 12-inch speaker and because the design reminds me of the GRF-rectangular and so I started this adventure.
In the first part of the work I used birch plywood 12 mm, then this will be covered with american ash 20 mm and the mobile will remember the old stile Tannoy.
some photos:
In the first part of the work I used birch plywood 12 mm, then this will be covered with american ash 20 mm and the mobile will remember the old stile Tannoy.
some photos:
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.