I'm planning to design and build my own 3 way active loudspeakers, based on the Hypex class-D modules and XO done by the DEQX HDP-3.
I've found some usefull driver tests on the web (zaph audio, etc) for Scan Speak and Seas drivers but not for Accuton's ceramic drivers. Has anyone experience with these apparently very good and very low harmonic distortion drivers?
Regards
I've found some usefull driver tests on the web (zaph audio, etc) for Scan Speak and Seas drivers but not for Accuton's ceramic drivers. Has anyone experience with these apparently very good and very low harmonic distortion drivers?
Regards
Some examples
http://www.diyaudio.com/forums/multi-way/158110-using-accuton-c50-widerange.html#post2038727
http://www.diyaudio.com/forums/multi-way/161529-tweeter-depth-trigonometry-waveguide.html
http://www.diyaudio.com/forums/multi-way/107025-accuton-c95-t6-advice-wanted.html#post1730764 with link to Troels.
http://www.diyaudio.com/forums/multi-way/158110-using-accuton-c50-widerange.html#post2038727
http://www.diyaudio.com/forums/multi-way/161529-tweeter-depth-trigonometry-waveguide.html
http://www.diyaudio.com/forums/multi-way/107025-accuton-c95-t6-advice-wanted.html#post1730764 with link to Troels.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.