12-inch wooden horn speaker

gxcnabin · 06:27 PM

English bad, pictures speak

gxcnabin · 8th May 2010, 06:32 PM

Continue ...

Diameter 245mm

gxcnabin · 10th May 2010, 08:52 AM

Continue ...

SunRa · 10th May 2010, 02:58 PM

Nice, I guess you used a lathe to turn those, right? What compression driver do you use with that horn?

badman · 10th May 2010, 03:16 PM

Indeed, nice work. Your english conveys all it needs to "Pictures speak" is the single greatest pair of words I've ever seen on this forum.

gxcnabin · 10th May 2010, 04:03 PM

Quote:

Originally Posted by SunRa

Nice, I guess you used a lathe to turn those, right? What compression driver do you use with that horn?

Yes, lathe. Compressed drive is customized.
Thanks！

gxcnabin · 10th May 2010, 04:35 PM

Quote:

Originally Posted by badman

Indeed, nice work. Your english conveys all it needs to "Pictures speak" is the single greatest pair of words I've ever seen on this forum.

Thanks！！

DaveCan · 10th May 2010, 07:13 PM

Using wood, especially the right kind for tone etc, makes a lot of sense to me over using metal or plastics ... Good effort

doug20 · 10th May 2010, 08:26 PM

any off axis measurements?

Could you also explain the custom Driver comment? What Compression driver would be comparable if we are to try and buy one?

gxcnabin · 11th May 2010, 12:16 PM

Quote:

Originally Posted by doug20

any off axis measurements?

Could you also explain the custom Driver comment? What Compression driver would be comparable if we are to try and buy one?

Frequency response graph is in the studio test，For reference only.
（由于没有专业消音室测试，只能在录音棚隔音室测试的，频响图只供参考）

Drive is customized，For the production of the Loudspeakers and custom.
（驱动头是定制品，木号角也是由本驱动头而开发的）

Sorry, English is really poor.
（对不起，英文很差，复得不好！别见怪！）

10th May 2010, 03:16 PM	#5
badman Custom Title diyAudio Member Join Date: Sep 2003 Location: Sunny Tustin, SoCal	Indeed, nice work. Your english conveys all it needs to "Pictures speak" is the single greatest pair of words I've ever seen on this forum. __________________ I write for www.enjoythemusic.com in the DIY section. You may find yourself getting a preview of a project in-progress. Be warned!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fostex Wooden Horn H400 and D1400 Driver	Lindell	Multi-Way	6	20th March 2009 02:21 PM
How to DIY a wooden multicell Horn	Jimmy DIY	Multi-Way	11	1st October 2008 08:32 PM
JL W3v3 10-inch or 12-inch?	bad1301forlife	Subwoofers	1	1st April 2007 09:05 AM
Two 8 inch usher vs one 12 inch M&K	qguy	Multi-Way	0	25th October 2006 10:54 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th May 2010, 02:58 PM	#4
SunRa diyAudio Member Join Date: Aug 2004 Location: Romania	Nice, I guess you used a lathe to turn those, right? What compression driver do you use with that horn?

10th May 2010, 07:13 PM	#8
DaveCan diyAudio Member Join Date: Nov 2005 Location: Moncton NB	Using wood, especially the right kind for tone etc, makes a lot of sense to me over using metal or plastics ... Good effort

10th May 2010, 08:26 PM	#9
doug20 diyAudio Member Join Date: Mar 2009	any off axis measurements? Could you also explain the custom Driver comment? What Compression driver would be comparable if we are to try and buy one?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)