Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

High-performance glue for cab building?
High-performance glue for cab building?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 18th June 2003, 03:07 PM   #1
niner is offline niner
diyAudio Member
Join Date: Oct 2002
Location: USA
Default High-performance glue for cab building?


Anyone has tried to use this kind of glue to build speaker cabinet? Is it overkill?
  Reply With Quote
Old 18th June 2003, 04:04 PM   #2
Jimmy154 is offline Jimmy154  United States
diyAudio Member
Jimmy154's Avatar
Join Date: Jun 2002
Location: NH, USA
I use titebond, but not the polyurithane titebond on that page and it's good enough. Any wood glue is good enough, atleast for MDF. MDF always breaks right below the glue line because it doesn't hold together as well as a regular piece of wood. It splits and separates quite easily so a very strong wood glue would be useless, IMO.
  Reply With Quote
Old 18th June 2003, 04:18 PM   #3
JOE DIRTŪ is offline JOE DIRTŪ  Canada
diyAudio Member
JOE DIRTŪ's Avatar
Join Date: Apr 2003
Location: Brantford, ON
I have used many adhesives and deal with the manufactures direct...3M being one...they had many alternatives...as far as speakers go with MDF (real stuff)...weldbond glue has worked great for me and with MDF I resin coat the interior of the box to seal any porosity and silicone caulk the joints for added sealing

  Reply With Quote
Old 18th June 2003, 08:38 PM   #4
niner is offline niner
diyAudio Member
Join Date: Oct 2002
Location: USA
The poly glue from that page suppose to set very fast, and the bond is very strong. I figure I can use it to just glue the panels without using screw. I have split MDF panel by putting screw in along the edge. At the same time, I don't want to wait 4-8 hours for the regular wood glue to dry.
  Reply With Quote
Old 18th June 2003, 08:57 PM   #5
EKG is offline EKG  United States
diyAudio Member
Join Date: Jun 2003
Location: North east
Default Glue

The Titebond product you are looking at is a high performance hot melt glue. The biggest problem you are going to have with the stuff is joint creep while it is setting. Sixty seconds to set up is still a long time to hold a good sized panel motionless. if it slides, and soft glue is a very good lubricant, and then sets up your are pretty much out of luck. If your problem has been srcews splitting MDF edgeg get a good countersink drill and predrill all your screws. The other really useful thing to have is a set of corner clamps. If you glue and screw, two light duty ones are adequate. EKG
  Reply With Quote
Old 18th June 2003, 11:08 PM   #6
SisterOfMercy is offline SisterOfMercy  Europe
diyAudio Member
SisterOfMercy's Avatar
Join Date: Mar 2003
It is very nice to work with glue that fills gaps, especially when you're not working with 90 degree corners. It's very easy to get the angles a bit incorrect, and the gap filling ability of the glue really helps there.
  Reply With Quote
Old 19th June 2003, 01:03 AM   #7
Pete Mazz is offline Pete Mazz
diyAudio Member
Join Date: Jan 2002
Location: Bucks County, Pa
I have that glue system at the shop. It doesn't work well for cabinet construction because it's viscosity is too thick. By the time you grab a clamp, the glue will have begun to set and you can't apply enough pressure to get a nice tight joint. Forget about trying to hold it together by hand. For enclosures I use Titebond II wood glue. It only has to be clamped for about 1/2 an hour. If your cuts are not perfect, just caulk the inside seams with a flexible caulk like silicone.

  Reply With Quote


High-performance glue for cab building?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
The best glue for building cabinets (IMHO) critofur Multi-Way 0 24th March 2008 05:32 PM
Which High temp Glue crissty Multi-Way 7 17th July 2005 02:02 PM
high performance but cheap amp rulezzz Solid State 7 15th May 2004 04:30 PM
Seeking: High-Performance Projects amo Solid State 4 8th December 2003 07:22 PM
Precision and/or high performance SMD caps peranders Parts 21 17th April 2003 01:08 PM

New To Site? Need Help?

All times are GMT. The time now is 09:09 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio