ProAc Response 3.8 clone

andrew01 · 17th June 2003, 10:54 AM

I know this has been asked before by others on this forum , but I'm desperate for information about the possiblity of a clone of the 3.8.........

I've listened to some speakers called "38T" here at this site :

http://www.nelsonaudio.com.cn/009.htm

I'm not saying these are *clones* but they sound fantastic to me ,
but rather expensive too !!!!

Please ! , Please ! does anyone have any data on cloning the 3.8's

Regards
Andrew

dshortt9 · 17th June 2003, 12:33 PM

They look like clones to me. What was the price range of the 38T?
Here is a link to a 3.5 clone? http://audioclone.free.fr/previn1.html I know ther is a site for the 3.8 but cannot find it.

andrew01 · 18th June 2003, 01:45 AM

The price was $4300 Aus If I remember correctly.
Also the info on the french site is wrong I think . Here's what I could find out about the 38T for those interested.

Measurements External:

340mm deep
233mm wide
1215 mm high
plus
plinth = 25mm thick , extending 20mm out on all 4 sides.

Nominal Z = 4ohms

2 rear facing ports : 70mm I.D x 135mm long

Drivers are :
2 x ScanSpeak 18W/8545-00
1 x D2905/9700

Regards
Andrew

17th June 2003, 10:54 AM	#1
andrew01 diyAudio Member Join Date: May 2003 Location: Adelaide Southern Suburbs	ProAc Response 3.8 clone I know this has been asked before by others on this forum , but I'm desperate for information about the possiblity of a clone of the 3.8......... I've listened to some speakers called "38T" here at this site : http://www.nelsonaudio.com.cn/009.htm I'm not saying these are clones but they sound fantastic to me , but rather expensive too !!!! Please ! , Please ! does anyone have any data on cloning the 3.8's Regards Andrew

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
proac response 2.5 clone 98%	elviukai	Multi-Way	3	22nd September 2007 09:39 AM
My ProAc Response 2.5 clone	tald	Multi-Way	10	22nd September 2007 09:39 AM
Proac Response 2.5 Clone	tald	Multi-Way	1	14th August 2005 07:29 AM
X-over for Proac Response 2 clone	DirkD	Multi-Way	0	26th August 2004 11:51 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th June 2003, 12:33 PM	#2
dshortt9 diyAudio Member Join Date: Apr 2001 Location: Milwaukee, Wisconsin	They look like clones to me. What was the price range of the 38T? Here is a link to a 3.5 clone? http://audioclone.free.fr/previn1.html I know ther is a site for the 3.8 but cannot find it.

18th June 2003, 01:45 AM	#3
andrew01 diyAudio Member Join Date: May 2003 Location: Adelaide Southern Suburbs	The price was $4300 Aus If I remember correctly. Also the info on the french site is wrong I think . Here's what I could find out about the 38T for those interested. Measurements External: 340mm deep 233mm wide 1215 mm high plus plinth = 25mm thick , extending 20mm out on all 4 sides. Nominal Z = 4ohms 2 rear facing ports : 70mm I.D x 135mm long Drivers are : 2 x ScanSpeak 18W/8545-00 1 x D2905/9700 Regards Andrew

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)