ProAc Response 3.8 clone

[andrew01]

I know this has been asked before by others on this forum , but I'm desperate for information about the possiblity of a clone of the 3.8.........

I've listened to some speakers called "38T" here at this site :

http://www.nelsonaudio.com.cn/009.htm

I'm not saying these are *clones* but they sound fantastic to me ,
but rather expensive too !!!!

Please ! , Please ! does anyone have any data on cloning the 3.8's

Regards
Andrew

 

[dshortt9]

They look like clones to me. What was the price range of the 38T?
Here is a link to a 3.5 clone? http://audioclone.free.fr/previn1.html I know ther is a site for the 3.8 but cannot find it.

 

[andrew01]

The price was $4300 Aus If I remember correctly.
Also the info on the french site is wrong I think . Here's what I could find out about the 38T for those interested.

Measurements External:

340mm deep
233mm wide
1215 mm high
plus
plinth = 25mm thick , extending 20mm out on all 4 sides.

Nominal Z = 4ohms

2 rear facing ports : 70mm I.D x 135mm long

Drivers are :
2 x ScanSpeak 18W/8545-00
1 x D2905/9700


Regards
Andrew