I have a pair of Klipsch Heresys where one recently vibrated itself off of it's stand and hit the floor. Minor cabinet damage, but the woofer no longer functions. Took the back off tonight and checked connections which were good. I discovered that when I wiggle the wire that is soldered to the woofer and goes through to the dust cap ( the 3" cone in the middle of the woofer.....I suppose this is what it's called), the signal was finally there and I could get a scratchy sound. The solder connections were good so it must be inside the dust cap. I live in small town USA and there are no repair shops within 100 miles. Any suggestions from anyone?
You may have dislodged the magnet. If so, it may not be repairable. The coil may have been damaged.
Maybe ask over here:
<meta name="description" content="Klipsch audio systems provide the true audio/video lover a wide variety of high performance loudspeakers and loudspeaker systems for music and home theater entertainment centers, including iPod speakers, multimedia s
|All times are GMT. The time now is 11:10 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio