Budget 3way ,center, and rear

Goatnutz · 24th February 2010, 04:51 PM

I have a Pioneer 280 watt A/V Multi channel receiver model VSX-D508 and i wanted to upgrade my speakers (some cheap JVS's). I do some hobby electronics and woodworking so if any one has some speaker, crossover model numbers and wiring, enclosure design that would work well for me it would be great. I was thinking of getting all the parts and building the 3way left and right first then adding the center and last the rear L/R. My budget is flexible but around 300.00 for the speakers, and crossovers. The wood and extra stuff i won't sweat and can pay for over time. Also i have no problem making crossovers if i have part #'s and a schematic.

Thanks

Goatnutz · 24th February 2010, 11:43 PM

Maybe a simpler question. What can i power with the receiver i have? Also i forgot to say that i have a powered sub that i was planning to use (KLH 10").

Fast1one · 25th February 2010, 12:18 AM

I think it would be best if you searched from some of the well documented speaker projects and building something from those.

Zaph's designs are a good place to start and highly regarded as some of the best for any budget. Zaph|Audio

beaner · 25th February 2010, 01:54 AM

Jim Holtz has a design for about $60.

Speaker Design Works

24th February 2010, 04:51 PM	#1
Goatnutz diyAudio Member Join Date: Feb 2010 Location: Washington	Budget 3way ,center, and rear I have a Pioneer 280 watt A/V Multi channel receiver model VSX-D508 and i wanted to upgrade my speakers (some cheap JVS's). I do some hobby electronics and woodworking so if any one has some speaker, crossover model numbers and wiring, enclosure design that would work well for me it would be great. I was thinking of getting all the parts and building the 3way left and right first then adding the center and last the rear L/R. My budget is flexible but around 300.00 for the speakers, and crossovers. The wood and extra stuff i won't sweat and can pay for over time. Also i have no problem making crossovers if i have part #'s and a schematic. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Phantom Rear Center ??	]\|[ GorE	Multi-Way	6	18th June 2011 11:57 PM
Adding center and rear channels	nebelk	Multi-Way	2	13th March 2008 06:05 AM
Center and Rear Channels that match with Acapella SE	samsagaz	Multi-Way	0	9th September 2006 06:04 PM
searching software to switch front speakers to rear and rear to front!-dolby surround	MCM	Everything Else	6	6th February 2004 09:29 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th February 2010, 11:43 PM	#2
Goatnutz diyAudio Member Join Date: Feb 2010 Location: Washington	Maybe a simpler question. What can i power with the receiver i have? Also i forgot to say that i have a powered sub that i was planning to use (KLH 10").

25th February 2010, 12:18 AM	#3
Fast1one diyAudio Member Join Date: Sep 2006	I think it would be best if you searched from some of the well documented speaker projects and building something from those. Zaph's designs are a good place to start and highly regarded as some of the best for any budget. Zaph\|Audio

25th February 2010, 01:54 AM	#4
beaner diyAudio Member Join Date: Feb 2010 Location: Powell River, BC	Jim Holtz has a design for about $60. Speaker Design Works

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)