I have two JBL E130-8 speakers, and i know just about nothing about speakers besides, making noise come out of them, i pretty much plug in and test. I know these speakers are not worth destroying so i though I'd ask first.
They were used for a 4cabinet guitar stack, but I haven't used it lately. I was wondering how it would sound in a car with an Alpine FLEX2 MRP-T406 Amplifier
any help appreciated.
Speaker/Specs
JBL E130 from US Speaker - JBL E130 lead guitar 15" speaker. JBL E Series and JBL professional speaker components
I also have 4 of these speakers if they would work better
Buy JBL LCS1200W Loud and Clear Series 12" Subwoofer for $49.95
These are the Amp Specs i found
Technical Details : MRP-T406
MAX POWER (EIAJ)
90W x 2 (4Ohm Stereo)
240W x 1 (Bridged 4Ohm)
RMS AT 14.4V, 20Hz-20kHz
40W x 2 (into 4Ohm, 0.08% THD)
60W x 2 (into 2Ohm, 0.3% THD)
120W Bridged (into 4Ohm, 0.3% THD)
GENERAL
Frequency Response: 10Hz-50kHz (+0,-1dB)
S/N Ratio: 100dBA
FET DC-DC Power Supply
Built In Divider (HP/LP, 80Hz, 12 dB/oct.)
Crossover Frequency (12dB/Oct.): 80Hz
Input Sensitivity (V/at 10Kohm): 0.2-4.0V
Dimensions (mm) W x H x D: 226 x 36 x 140
Fully Discrete Preamp Stage
Duo-� Circuit
Speaker-Level Input
Top Panel Power Indicator
They were used for a 4cabinet guitar stack, but I haven't used it lately. I was wondering how it would sound in a car with an Alpine FLEX2 MRP-T406 Amplifier
any help appreciated.
Speaker/Specs
JBL E130 from US Speaker - JBL E130 lead guitar 15" speaker. JBL E Series and JBL professional speaker components
I also have 4 of these speakers if they would work better
Buy JBL LCS1200W Loud and Clear Series 12" Subwoofer for $49.95
These are the Amp Specs i found
Technical Details : MRP-T406
MAX POWER (EIAJ)
90W x 2 (4Ohm Stereo)
240W x 1 (Bridged 4Ohm)
RMS AT 14.4V, 20Hz-20kHz
40W x 2 (into 4Ohm, 0.08% THD)
60W x 2 (into 2Ohm, 0.3% THD)
120W Bridged (into 4Ohm, 0.3% THD)
GENERAL
Frequency Response: 10Hz-50kHz (+0,-1dB)
S/N Ratio: 100dBA
FET DC-DC Power Supply
Built In Divider (HP/LP, 80Hz, 12 dB/oct.)
Crossover Frequency (12dB/Oct.): 80Hz
Input Sensitivity (V/at 10Kohm): 0.2-4.0V
Dimensions (mm) W x H x D: 226 x 36 x 140
Fully Discrete Preamp Stage
Duo-� Circuit
Speaker-Level Input
Top Panel Power Indicator