2-way or 3-way - please help - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 2nd December 2009, 06:59 PM   #1
diyAudio Member
 
Join Date: Dec 2009
Default 2-way or 3-way - please help

Hi everyone,

I am relatively new to diy audio. I have just built a 5.1 speaker system and learned a lot in the process. Now that this project is finished, I see the mistakes I made and I want to start a new project which would be 10 times better than my first try.

So here it is.

I want to build two bookshelf speakers. What I am aiming for is high sound quality and nice finish on the cabinets.

I first considered doing a 2-way speaker with a woofer and a tweeter.
Woofer: DAYTON RS-150T-8 (link)
Tweeter: TANG BAND 25-1719S (link)

But I wonder if I can have a good flat frequency response with only those 2 drivers or if I would also need a mid such as this one:
Mid: DAYTON RS52AN-8 (link)

One way or the other what should be my crossover points and should I go with a 6dB or 12dB roll off?

Thank you all for your help!
  Reply With Quote
Old 3rd December 2009, 03:48 AM   #2
"Q" is offline "Q"  United States
diyAudio Member
 
"Q"'s Avatar
 
Join Date: Dec 2009
Location: Sacramento,CA
I think that you would be ok with just those two drivers, better off even. I'd shoot for a 2k crossover point but I don't think that theres any way you can get around putting a zoebel network for the high end response of that woofer. That said I wouldn't necessarily jump at putting these two drivers together myself, but I think it's more than worth a shot. Look at it this way....if it goes bad then you will have to learn what went wrong....if it goes perfectly you will just have wonder what went right.
__________________
"You have fallen into my plan trap!"
  Reply With Quote
Old 3rd December 2009, 09:22 AM   #3
diyAudio Member
 
Join Date: Aug 2007
3-way of course - it has many benefits over the 2-way and two drawbacks - price and crossover design. If this is your first diy try, I would suggest to pick up a project that already works, Troels`s website has a lot of them with good drivers, Zaph also has some and I think he had a 3-way with the Dayton drivers. You may want to check them.
2k for the Dayton woofer looks over its usable range, it has several peaks which would make the crossover an issue. Looking at the massive cone resonanse at 10Khz - I may go for a 4th order not over 1.4Khz. You will need a notch and imp. correction as well.
If going to a 2-way - http://zaphaudio.com/SR71.html this one looks very promising ( I have not heard it, neither I have played with the reed cones ).

Last edited by Mario Pankov; 3rd December 2009 at 09:27 AM.
  Reply With Quote
Old 3rd December 2009, 11:14 PM   #4
diyAudio Member
 
Join Date: Feb 2002
Location: Western Sydney
I think they'd make an OK 2-way, but you need a high order xover to deal with that peak. Unibox gives me ~45 L @ 45 Hz, (although 30L looks OK with a bit less bass) maybe too big for a Bookshelf? Do you have a target volume?
__________________
Impedance varies with frequency, use impedance plots of your drivers and make crossover calculations using the actual impedance of the driver at the crossover frequency
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 10:42 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2