diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   Rewiring sealed speakers (http://www.diyaudio.com/forums/multi-way/155612-rewiring-sealed-speakers.html)

pqhf5kd 24th November 2009 08:57 PM

Rewiring sealed speakers
 
Hey.
I have a pair of Sanyo SX-892's that badly need rewiring. They are in sealed cabinets. Is it safe to open these and what would be the best way to do this?

Thanks, Jake.

Cal Weldon 24th November 2009 10:18 PM

If the cabinets do not have exposed fasteners try pulling the drivers. Exactly what do you mean they need rewiring?

richie00boy 24th November 2009 10:38 PM

How do you know they need rewiring if you have never seen inside?

pqhf5kd 25th November 2009 07:08 AM

Cal Weldon: The speakers grills arnt removable. Though with some gentle(ish) pray iv removed them and have access to the inside.

Richie00boy: There is no banana sockets or speaker clips. The damaged, thin cable exits from a hole in the back of the cabinet.

These speakers definitely low end. Thanks for your help.

richie00boy 25th November 2009 08:56 AM

Maybe if you cut a hole in the back for a terminal plate (vacuum the dust out of the box after) then you can get good enough access (and the damaged wire is not too far in) to put the wires onto the terminal plate?

pqhf5kd 25th November 2009 02:33 PM

Im in there now, the grill had the speakers mounted to it.
should sound lots better soon.


All times are GMT. The time now is 03:23 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2