Audionics speaker potentiometers

aryl · 18th November 2009, 04:16 AM

hello. i've got a set of audionics tower speakers. they are about 5 feet high and about a foot wide and deep.
one of the two massive crossover potentiometers in the back of one is spun. i need the replace it. does anyone know where to find these. i measured across the termanils on either of of the three to get 14 ohms.
will i have the replace the matching pot in the other speaker?

thank you for any information, yeyh.

david

gooki · 18th November 2009, 05:11 AM

If you don't adjust them you could replace with a fixed resistor.

aryl · 18th November 2009, 11:45 PM

gooki, i havnt listened to them yet. wouldn't know where to fix it.
i got the speakers from my dad. the terminals were cheap and only take small guage wire. i'm replacing the terminals and dont to wire in a bad pot.

18th November 2009, 04:16 AM	#1
aryl diyAudio Member Join Date: Oct 2009	Audionics speaker potentiometers hello. i've got a set of audionics tower speakers. they are about 5 feet high and about a foot wide and deep. one of the two massive crossover potentiometers in the back of one is spun. i need the replace it. does anyone know where to find these. i measured across the termanils on either of of the three to get 14 ohms. will i have the replace the matching pot in the other speaker? thank you for any information, yeyh. david

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
So I did try all those different potentiometers	Peter Daniel	Chip Amps	308	12th August 2009 02:29 PM
Potentiometers - USA	Brit01	Tubes / Valves	8	8th August 2009 12:14 AM
For Sale: 2 Fosgate Audionics FG4200 Power Amps	jtieman	Swap Meet	1	9th March 2009 03:23 PM
C and L of potentiometers?	Christer	Parts	2	26th June 2007 11:26 AM
Audionics help	lpd	Tubes / Valves	5	5th March 2007 05:03 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th November 2009, 05:11 AM	#2
gooki diyAudio Member Join Date: Dec 2008	If you don't adjust them you could replace with a fixed resistor.

18th November 2009, 11:45 PM	#3
aryl diyAudio Member Join Date: Oct 2009	gooki, i havnt listened to them yet. wouldn't know where to fix it. i got the speakers from my dad. the terminals were cheap and only take small guage wire. i'm replacing the terminals and dont to wire in a bad pot.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)