http://www.jblpro.com/pub/components/2451.pdf
2452h-sl - Lansing Heritage Forums
Also, 2452H, others....
2452h-sl - Lansing Heritage Forums
Also, 2452H, others....
http://www.jblpro.com/pub/components/2451.pdf
2452h-sl - Lansing Heritage Forums
Also, 2452H, others....
Except they are hella expensive...
Wouldnt that very much depend on SPL ?
My bet is 800hz/12db would be ok ?
Right now, this BMS would be my choise too
Partly because its really just a 1" driver(44mm diaphragm) with 1.5"/36mm exit
One of a kind, at least I dont know any other
I suppose I would use 20watt amp like F5, or maybe small 10watt tubeamp like SimpleSE, or newSimplePP
My bet is 800hz/12db would be ok ?
Right now, this BMS would be my choise too
Partly because its really just a 1" driver(44mm diaphragm) with 1.5"/36mm exit
One of a kind, at least I dont know any other
I suppose I would use 20watt amp like F5, or maybe small 10watt tubeamp like SimpleSE, or newSimplePP
Last edited:
Not to the resourceful DIYer:Except they are hella expensive...
Attachments
One idea is to have the 200 euro RCF N850 (3-inch Diaphragm, 2.0-inch Exit Throat) paying from ~700Hz to 3K with a supertweeter out of main range.
http://www.toutlehautparleur.com/moteurs-2/rcf-n850-p-737.html
http://www.toutlehautparleur.com/moteurs-2/rcf-n850-p-737.html
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- Bms 4555