It is the 1.5" port on this page: http://www.creativesound.ca/details.php?model=1.5FPT4
but it is cut flush to the inside of the cabinet.
but it is cut flush to the inside of the cabinet.
ELF INFO
Sean has listened to them a few times as DIY meets up here in Surrey BC Canada.
I do the cabinets for Bob.
The port is 1.5 X .75" NOT 4"
This is correct.
4" tunes them down in the 75HZ range and they are not that capable.
Now the super ELF will be loaded on the CSS site soon.
uses a 871S as a tweeter and a 319S1 as the driver in a 2way.
Al
Sean has listened to them a few times as DIY meets up here in Surrey BC Canada.
I do the cabinets for Bob.
The port is 1.5 X .75" NOT 4"
This is correct.
4" tunes them down in the 75HZ range and they are not that capable.
Now the super ELF will be loaded on the CSS site soon.
uses a 871S as a tweeter and a 319S1 as the driver in a 2way.
Al
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.