|Multi-Way Conventional loudspeakers with crossovers|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|16th May 2003, 05:38 PM||#1|
Join Date: Aug 2002
multimedia powered speakers... driver match?
Ok, recently my computer speakers died. I paid over $400 for them and think I will sell the set I get as a replacement, then use the money to finance another sonosub project and also to build some power speakers and sub for my computer. The electronics of it will be Gainclones, with active xovers using Burr-Brown chips. The system will be 2.1, and should be very efficient for computer speakers- >90dB/W. As of now, I intend to use:
Dayton Pt2 Planar tweeter
and two Tang Band 4" midbass per satellite
one Dayton 12" woofer for the sub.
The tweeter is more efficient than the woofer, so I will attenuate that, and crossover at about 3000Hz. The midbass will be allowed to roll off naturally to whatever they don't want to play. The sub will play everything 150Hz down, with a 24dB/octave xover.
Will these drivers match sonically? Will they sound good? Due to size limitations, 4" is as large a woofer as I can go, and I like the planar tweeter concept. But, if they won't go, they won't be built. What about the sub driver... is it ok? Maybe a 10"? Power per channel will probably be 30-40W.
Hmm... will the tweeter cause magnet interference? Does it have a magnet?
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Trying to match a sub driver with setup||TheOtherSide||Subwoofers||1||11th September 2007 02:27 PM|
|any driver match this speakers prfmce for le$$||zuki||Multi-Way||19||30th March 2007 08:00 PM|
|Powered Multimedia Speakers with DSP||bimbla||Chip Amps||1||18th January 2006 01:35 PM|
|Multimedia Satellites, Open Baffle?, Full Range? Driver Selection Help Required||ozynigma||Multi-Way||32||7th May 2004 03:29 PM|
|New To Site?||Need Help?|