I know it is a no no to do this but I had to ask

mcmahon48 · 12th September 2009, 05:51 AM

Two Mid woofers in series both 4 ohms for an 8 ohm load and then putting a mid range in parallel to boost the woofer roll off and help out the midrange sensitivity. Using an LR2 crossover and 50Uf cap plus a a resistor.
I would believe the would be a 1st order for the speaker
I know that it would cause dramatic phase shift, yet ist there any possilble way to get the phase to align and use it also as a zobel circuit
Just a desire to get past the skin affect of the coil in the midrange add extra detail clarity

12th September 2009, 05:51 AM	#1
mcmahon48 diyAudio Member Join Date: Aug 2008	I know it is a no no to do this but I had to ask Two Mid woofers in series both 4 ohms for an 8 ohm load and then putting a mid range in parallel to boost the woofer roll off and help out the midrange sensitivity. Using an LR2 crossover and 50Uf cap plus a a resistor. I would believe the would be a 1st order for the speaker I know that it would cause dramatic phase shift, yet ist there any possilble way to get the phase to align and use it also as a zobel circuit Just a desire to get past the skin affect of the coil in the midrange add extra detail clarity

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)