high quality low profile center speaker needed - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th September 2009, 07:43 PM   #1
diyAudio Member
 
Join Date: Nov 2004
Location: Seattle
Default high quality low profile center speaker needed

My plasma TV sits on top of an entertainment center cabinet and I need to set the center channel speaker on the top of the cabinet as well. The actual plasma screen sits about 10" above the top of the enterainment center so limits the height of the center channel channel box to about 9" overall. Width would not be an issue. This would work out good for a sideways MTM but I think that lobing issues are not in favor of this type design. So I am thinking a 2 way 5" TM with would be better. My mains are TMM Vifa XT25/XG18 (older Zaph design). Searching for high quality options. Any advice appreciated.

I saw ZaphAudio ZD5 and thought about modifying the box and triming the flanges on the drivers to minimize the height. I know this will affect the response somewhat. But it does use the same tweet with a better Scan woofer.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Flush To Plasma Center Speaker Design Needed diy_subs Multi-Way 7 25th October 2006 09:14 PM
Quality internal speaker wire needed harrisni Multi-Way 12 28th August 2006 02:48 AM
Guidance for my new 7.1-System needed (Center, backward-Speaker) Blitz Multi-Way 1 16th May 2005 06:32 PM
High-quality power supply for a gainclone not needed ? Blitz Chip Amps 35 1st February 2004 09:24 PM


New To Site? Need Help?

All times are GMT. The time now is 08:46 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2