A few questions about a 2-way system

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
J

jaycool1995

Member
Joined 2009
Hi,
I am going to build a 2-way system using the HiVi M6N as a woofer crossed over to a HiVi B3N at a frequency between 1000-2000hz, not sure were the best place to crossover would be. Would these two driver be a good sounding 2-way speaker or would it fail massively lol. I would be using the filter for B3N that zalph made for the fullrange speaker (That is what i originally bought the driver for). Would i need BSC for the Woofer? And is the M6N the best woofer to go for out M5N or the M6N.
Thanks
 
T

tinitus

Ex-Moderator R.I.P.
Joined 2005
That B3N is so low in sensitivity that I do not believe its worth the trouble
Surely you can find a much better design

Anyway, the concept might work though
The use of a small fullrange makes a bigger woofer possible
But drivers you have chosen seem to be all wrong, sorry
They dont give you the obvious advantage of such design
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom