Box volume D10G Hi-Vi.

racoon · 28th June 2009, 07:31 AM

Hi There all.
Has anyone had success with the Hi-Vi D10G woofers?
Im looking at putting together a three way system with these drivers,and was looking at using a reflex box of 80 litres.
The other drivers are the 15w75 dynaudio for the middle range/or the D5G midbass unit in around 7litres sealed.
The tweeter is an mdt32 morel.
The crossover is a little tricky due to the sensitivity of the D5G...and the dyn for that matter also.
Has anyone got any thoughts on the box volume and port please.
Thankyou in advance.
Rod.

Dr.EM · 28th June 2009, 08:25 PM

I have these drivers. Since they have a low EBP, they are well suited to a closed box design. I was planning to use a sealed box with linkwitz transform, which may not even be required depending on room gain (-3db at 41Hz is the response in 80L).

Here is my thread on the subject:

Bass for 3 way system

I have since changed to a smaller design and so never actually implemented the woofers (they are for sale in fact on here). I tried them in a dipole though and they perform rather well

racoon · 29th June 2009, 03:30 PM

Thankyou for the reply Doc

.
On looking at what you did with the drivers,and the responce to my question,i thought i better have a good look at the D10G a whole lot closer.
I have found that there are two sets of numbers for this woofer on the net...one set the manufacturer claim and another from the States.
Anyway the EBP i caculated for the Swan/cum responce/Jaycar woofer sold in Australia =52. The American/cum parts express and others has an EBP of 46.3.
What the....is going on!!
The Australian import claims (Vb)(L) 65....with an (Fb)(Hz) 30Hz!!
and an (F3) -3db 32(Hz).
The American model claims a seald box (Vb) 75L....with an (F3) 40Hz!.
And the Chineze boast they now have consistancy in manufacturing!!!.
Rod.

28th June 2009, 07:31 AM	#1
racoon diyAudio Member Join Date: Jul 2006	Box volume D10G Hi-Vi. Hi There all. Has anyone had success with the Hi-Vi D10G woofers? Im looking at putting together a three way system with these drivers,and was looking at using a reflex box of 80 litres. The other drivers are the 15w75 dynaudio for the middle range/or the D5G midbass unit in around 7litres sealed. The tweeter is an mdt32 morel. The crossover is a little tricky due to the sensitivity of the D5G...and the dyn for that matter also. Has anyone got any thoughts on the box volume and port please. Thankyou in advance. Rod.

28th June 2009, 08:25 PM	#2
Dr.EM diyAudio Member Join Date: Oct 2006 Location: Swindon	I have these drivers. Since they have a low EBP, they are well suited to a closed box design. I was planning to use a sealed box with linkwitz transform, which may not even be required depending on room gain (-3db at 41Hz is the response in 80L). Here is my thread on the subject: Bass for 3 way system I have since changed to a smaller design and so never actually implemented the woofers (they are for sale in fact on here). I tried them in a dipole though and they perform rather well __________________ My music page 3-Way system build thread

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Volume control on DVD player remote. Lose resolution at low volume?	Circlotron	Digital Source	2	10th June 2011 07:20 PM
no volume	whoisthisis	Solid State	0	15th February 2009 04:09 PM
set volume with 50k Pot on Zen V4	cHab	Pass Labs	2	17th June 2008 12:49 PM
Jordan JX92S + Hi-Vi D10G + passive 1st order crossover?	Dumbass	Multi-Way	3	26th July 2005 11:57 AM
Low volume, even when set to max	Bong_water	Digital Source	0	20th April 2004 08:43 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th June 2009, 03:30 PM	#3
racoon diyAudio Member Join Date: Jul 2006	Thankyou for the reply Doc . On looking at what you did with the drivers,and the responce to my question,i thought i better have a good look at the D10G a whole lot closer. I have found that there are two sets of numbers for this woofer on the net...one set the manufacturer claim and another from the States. Anyway the EBP i caculated for the Swan/cum responce/Jaycar woofer sold in Australia =52. The American/cum parts express and others has an EBP of 46.3. What the....is going on!! The Australian import claims (Vb)(L) 65....with an (Fb)(Hz) 30Hz!! and an (F3) -3db 32(Hz). The American model claims a seald box (Vb) 75L....with an (F3) 40Hz!. And the Chineze boast they now have consistancy in manufacturing!!!. Rod.