Driver Recommendations for a 2.5way research project

nukaidee · 13th June 2009, 02:26 AM

I'm researching, and potentially building a 2.5 way instead. Zaph's 3.5 turned out a little more expensive than I anticipated as parts express wanted to charge me over 80$ for shipping ><! I would really appreciate your feedback within these drivers.

1. Woofers
a. TB w6-1137sc
b. TB w6-1139sg
(the 2 are very similar, I can run vented so I am guessing the SG might be slightly better? My knowledge of parameters is somewhat weak)

2. Mids
a. DA RS-175
b. TB w3-926sd
c. DA RS-180

3. Tweeter
a. DA ND-20FB
b. recommendations?

I'm hoping to make them floor standing, vented, approx 10" wide, 10" deep and about 40" tall.

Thanks again all =)

nukaidee · 13th June 2009, 05:20 AM

actually add one more. I'm considering the HiVi B3S as well. I hear many good things about it. Would it be suitable for a midrange?

nukaidee · 13th June 2009, 09:52 PM

now I'm thinking. Why can't I use the W3-871 from TB I have already as mids? I guess I'm all over the place with this right now, but basically I just have to enclose each drive in a proper box volume in the tower correct?

13th June 2009, 02:26 AM	#1
nukaidee diyAudio Member Join Date: Nov 2008	Driver Recommendations for a 2.5way research project I'm researching, and potentially building a 2.5 way instead. Zaph's 3.5 turned out a little more expensive than I anticipated as parts express wanted to charge me over 80$ for shipping ><! I would really appreciate your feedback within these drivers. 1. Woofers a. TB w6-1137sc b. TB w6-1139sg (the 2 are very similar, I can run vented so I am guessing the SG might be slightly better? My knowledge of parameters is somewhat weak) 2. Mids a. DA RS-175 b. TB w3-926sd c. DA RS-180 3. Tweeter a. DA ND-20FB b. recommendations? I'm hoping to make them floor standing, vented, approx 10" wide, 10" deep and about 40" tall. Thanks again all =)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sub driver recommendations	smallangryboy	Subwoofers	0	3rd August 2008 12:11 PM
Research Project: Need your op-amp reviews!	zagisrule!	Chip Amps	5	2nd May 2007 06:33 PM
Driver recommendations...	moray james	Car Audio	4	19th September 2006 06:19 AM
Driver recommendations	The_Mox00	Multi-Way	5	5th September 2006 06:58 PM
mtm versus tm driver recommendations on project with $500 driver and xo part limit	gsattler	Multi-Way	4	20th May 2002 05:54 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th June 2009, 05:20 AM	#2
nukaidee diyAudio Member Join Date: Nov 2008	actually add one more. I'm considering the HiVi B3S as well. I hear many good things about it. Would it be suitable for a midrange?

13th June 2009, 09:52 PM	#3
nukaidee diyAudio Member Join Date: Nov 2008	now I'm thinking. Why can't I use the W3-871 from TB I have already as mids? I guess I'm all over the place with this right now, but basically I just have to enclose each drive in a proper box volume in the tower correct?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)