How does theese sub-plans look? - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 30th April 2003, 03:27 PM   #1
khorne is offline khorne  Norway
diyAudio Member
Join Date: Apr 2003
Location: norway, near oslo
Default How does theese sub-plans look?

Im considering to make two new subwoofers. Each shall have two peerless xls 10" in series and each sub will be driven by a hypex hs-200 amp. The two woofers shall be in seperate shambers, and the box will be symetric, so that all vibration caused by one xls will be canceled out by the other one. One xls fireing forwards and one backwards in pull-pull configuration... I guy I know uses four of the 12" xls, and uses the same method, and he say that there is absolutely no vibrations in his box. I belive it is made of 44 mm mdf. The sub I allready have uses one xls 10" and a hypex hs200. It is made of 50 mm mdf and weights 45 kilo I think, but the whole thing still vibrates. Im amazed by what the little thing can do, but it does unfortunatly not work to well in my room. I have heard that the solution is two subs...

But will the impedance be a problem for the hypex? With one xls I usually turn the volume at 50% and it seems like there is no problems with turning it way louder. I was hoping I could use the hypex and one peerless driver Iallready have because this is getting a little expencive... :|

  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Where to have a few PCB's made theese days? Magura Pass Labs 14 3rd January 2008 02:27 AM
How about theese N52 magnets for a ribbon tweeter project? swak Planars & Exotics 4 8th December 2006 03:54 AM
10 pieces aleph x and non of theese working elviukai Pass Labs 74 9th May 2006 06:24 AM
Theese could be nice but..... Magura Parts 4 6th January 2004 11:25 AM
VTA plans someone? Zen Mod Analogue Source 7 31st January 2003 12:56 AM

New To Site? Need Help?

All times are GMT. The time now is 03:43 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2