diyAudio (
-   Multi-Way (
-   -   SPICE modelling for crossover design (

zebra100 14th May 2009 09:05 AM

SPICE modelling for crossover design
I am using SPICE to try and get some baseline figures for a 3 way crossover I am working on. Does anyone know what the AC input on the simulation should be set to (ball park figures) for an amplifier output into the crossover? :confused:


pacificblue 14th May 2009 06:42 PM

The standard value is 2,83 V rms, which translates to 1 W into 8 Ohm. Although the frequency response should not depend on the voltage, so any value will do up to the amplifier's maximum output.

zebra100 15th May 2009 07:55 AM

Thank's :)

All times are GMT. The time now is 06:06 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2