diyAudio (
-   Multi-Way (
-   -   JBL 2206 crosswover (

b3keys 28th April 2009 06:19 PM

JBL 2206 crosswover
I'm a musician (not a tech) and am replacing a 12 driver with a JBL 2206. The specs call for: highest crossover at 1500K. This cab has a 3000K crossover. I note the range of the 2206 is up to 3.5k (I'm assuming major drop-of at the higher frequency's).
Will I hurt the speaker with a 3K X-over? The roll off doesn't bother me (I'll also be running some horns)

pk 29th April 2009 07:08 AM

Hi b3keys,

No, a higher crossover point for the JBL woofer will not hurt the woofer at all (a LOWER crossover point than specified for, say, a midrange or a tweeter would be a different matter for sure). However, the JBL 2206 will probably not sound good at 3k...

Best regards

All times are GMT. The time now is 10:03 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2