Best sub in for a Thiel CS 3.6 D26AG-36 tweeter? - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th April 2009, 08:36 AM   #1
diyAudio Member
 
Join Date: Mar 2009
Default Best sub in for a Thiel CS 3.6 D26AG-36 tweeter?

I had one of these get fried a while back. I sent it in and had it rebuilt since I was told they no longer stocked it.

It came back, but didn't sound much like the one in my other speaker. Recently it began sizzling, and it got worse over the past 3 weeks. With some music, it was not audible at high volumes, and with other stuff that seems to hit the right frequencies at the right time, it's audible at 80 dB.

The rebuild would probably cost more/be near impossible now that the cap itself has completely fell out of the tweeter.

I don't want to send it in for $150+ to get one that won't sound remotely like the one in my right speaker. I read 2 other posts on avsforum where people posted similar experiences, of female voices cracking sometimes with the new tweeter.

Does anyone here have a tweeter, or a source for it?

If not, can anyone suggest a drop in replacement? I really love these speakers, but the tweeter is slightly edgy compared to every other studio reference monitor & hi-fi speaker I use. I know that this has a lot to do with the source recording, but some stuff that is fine everywhere else is really edgy here, especially since I modified a new BB PCM1716 based DAC's slow & filtery sounding output stage. Something as detailed as the original with slightly less edge would be great.

I'm not on a budget, but not into spending $350/driver either. It's a 1" metal dome tweeter.

Thanks!
  Reply With Quote
Old 18th December 2016, 07:52 PM   #2
diyAudio Member
 
Join Date: Dec 2016
Default Same situation here

I just bought a pair of CS3.6's after owning a pair of 2.2's for many years. One of the tweeters is buzzing on the 3.6's and I was wondering what you ended up doing to solve this problem.
  Reply With Quote
Old 20th December 2016, 03:55 AM   #3
canvas is offline canvas  Taiwan
diyAudio Member
 
Join Date: Nov 2003
Location: Taiwan
I am also an owner of CS3.6. Before doing anything, make sure those caps are intact on crossover. Some resistors will get hot and damage the adjacent capacitor. They were simply putting them too close.


Click the image to open in full size.
__________________
FS: AD844,OPA627,AD797,LT1028... Here

Last edited by canvas; 20th December 2016 at 04:00 AM.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thiel 3.5 Equalizer Jazzcat Multi-Way 0 20th June 2007 03:09 AM
Thiel & Partner (Accuton) C11 Tweeter Yunick Swap Meet 0 25th October 2006 07:58 PM
Experiences with Hiquphon OWII or Thiel C23 tweeter? the-paradox Multi-Way 10 28th February 2006 05:14 PM
New Thiel CS 3.7 inertial Multi-Way 1 9th January 2006 01:53 PM
Accuton (Thiel) C13-6 or C24-6? cyclo Multi-Way 2 13th December 2005 10:33 PM


New To Site? Need Help?

All times are GMT. The time now is 07:54 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki