Building a Crossover

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
W

wolfsvein

Member
Joined 2009
Ok I have given up on these crossover I have an going to build my own but these are the speakers I have.

Tang Band W5-876SD 5" Shielded Subwoofer 8 ohm

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=264-826

and

Dayton ND28F-6 1-1/8" Neodymium Dome Tweeter 8 ohm not 6 ohm

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=275-040


I have figured that the crossover point I think should be 2000 Hz but please make suggestion on the crossover point.

On a 12 db Lintz setup I think it should be 1.25 mh coils and 4.9 of 5 uf caps. But I looking not to break the bank on the this I have looked at madisound, but I'm not familar with caps that much. Looking to spend about $30 for both crossovers. Thanks for the help in advanced.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom