Building a Crossover

wolfsvein · 21st January 2009, 05:17 PM

Ok I have given up on these crossover I have an going to build my own but these are the speakers I have.

Tang Band W5-876SD 5" Shielded Subwoofer 8 ohm

http://www.parts-express.com/pe/show...number=264-826

and

Dayton ND28F-6 1-1/8" Neodymium Dome Tweeter 8 ohm not 6 ohm

http://www.parts-express.com/pe/show...number=275-040

I have figured that the crossover point I think should be 2000 Hz but please make suggestion on the crossover point.

On a 12 db Lintz setup I think it should be 1.25 mh coils and 4.9 of 5 uf caps. But I looking not to break the bank on the this I have looked at madisound, but I'm not familar with caps that much. Looking to spend about $30 for both crossovers. Thanks for the help in advanced.

jerome69 · 21st January 2009, 06:06 PM

my last design: 3-way/3-liters

wolfsvein · 22nd January 2009, 03:39 AM

I would still like help with a 2 way crossover.

21st January 2009, 05:17 PM	#1
wolfsvein diyAudio Member Join Date: Dec 2008	Building a Crossover Ok I have given up on these crossover I have an going to build my own but these are the speakers I have. Tang Band W5-876SD 5" Shielded Subwoofer 8 ohm http://www.parts-express.com/pe/show...number=264-826 and Dayton ND28F-6 1-1/8" Neodymium Dome Tweeter 8 ohm not 6 ohm http://www.parts-express.com/pe/show...number=275-040 I have figured that the crossover point I think should be 2000 Hz but please make suggestion on the crossover point. On a 12 db Lintz setup I think it should be 1.25 mh coils and 4.9 of 5 uf caps. But I looking not to break the bank on the this I have looked at madisound, but I'm not familar with caps that much. Looking to spend about $30 for both crossovers. Thanks for the help in advanced.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
best practices in building a crossover	doug20	Multi-Way	3	9th July 2009 07:45 AM
Help building 3 way crossover	MAXIMUSuk	Multi-Way	3	2nd July 2008 06:23 AM
building my first crossover	jaygeorge1979	Multi-Way	27	28th November 2007 04:36 AM
help building a 3 way crossover	harrisni	Multi-Way	6	25th September 2006 03:50 PM
Crossover building question	shaunly	Parts	0	8th September 2005 05:31 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st January 2009, 06:06 PM	#2
jerome69 diyAudio Member Join Date: Feb 2008 Location: Lyon	my last design: 3-way/3-liters

22nd January 2009, 03:39 AM	#3
wolfsvein diyAudio Member Join Date: Dec 2008	I would still like help with a 2 way crossover.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)