|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
12th December 2008, 07:54 PM
|
#1 |
|
diyAudio Member
Join Date: Dec 2008
|
DIY biuld help
These speakers are quite old but have never let me down, when it come to sound and the low freq from the 10inch drivers are awsome and the modifed tops, as you can see in the pics.
the problem is there is now spec on the speakers and all i know is that: 10" driver - 800w 80oz magnet have 2 tops are from a TECHINCS - 2 way speaker - 80w have 2 the Cross-over is spot on, so i may not REPLACE them. I used them on a audiohead power amp with eq and pre-amp, rated at 1800w rms @4ohms. PROBLEM spec bins 630mm long and 450mm high 350mm wide They are too long for my home install and space is a problem, so complete rebiuld of them can anyone help please I have made a design based on the volume of the cabinet. http://s377.photobucket.com/albums/o...PEAKER%20PICS/ |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| I'm planning to biuld a sub | VEC7OR | Subwoofers | 14 | 30th August 2003 05:20 PM |
| New To Site? | Need Help? |
| Page generated in 0.07512 seconds (71.69% PHP - 28.31% MySQL) with 10 queries |
