Hello!
I have plans to build Onken speakers. Most speakers drawings, I have found has 15 inch drivers. I would like to build a small box with 12 or 10 inch driver. But the problem is that I can not find any drawings of boxes adapted for 12 or 10 inch drivers . Does anybody know where I can find ready-made drawings? Since I have no knowledge of the counting up one box, so is good if someone could help me find the finished drawings. Thank you!
I have plans to build Onken speakers. Most speakers drawings, I have found has 15 inch drivers. I would like to build a small box with 12 or 10 inch driver. But the problem is that I can not find any drawings of boxes adapted for 12 or 10 inch drivers . Does anybody know where I can find ready-made drawings? Since I have no knowledge of the counting up one box, so is good if someone could help me find the finished drawings. Thank you!
There's one here for the 12' Altec driver
http://www.diyaudio.com/forums/showthread.php?s=&threadid=84957&highlight=
Not sure if it will work with other 12' drivers though. If you do a search on Onken, there are a few big threads on fine tuning Onken boxes for other drivers...
JJ
http://www.diyaudio.com/forums/showthread.php?s=&threadid=84957&highlight=
Not sure if it will work with other 12' drivers though. If you do a search on Onken, there are a few big threads on fine tuning Onken boxes for other drivers...
JJ
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.