Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Building a 2.1 system out of a 48"x96" sheet of 3/4" MDF
Building a 2.1 system out of a 48"x96" sheet of 3/4" MDF
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 18th November 2008, 02:19 AM   #1
454Casull is offline 454Casull  Canada
diyAudio Member
Join Date: Jan 2004
Location: Toronto, ON, Canada
Default Building a 2.1 system out of a 48"x96" sheet of 3/4" MDF

I've created a AutoCAD 2000 .dwg file showing the pieces that can be cut out of a 3/4" sheet of MDF to get 2x 0.375 ft^3 enclosures and 1x 2.9 ft^3 enclosure. Can anybody host this file for me?


Outside dimensions for the satellites will be 8"x14"x9.5" (WHD). Outside dimensions for the sub will be 22"x22"x13.5" (WHD). I'm fairly confident the sub enclosure will be stable.

The sub enclosure will fit up to an 18" driver, but the mounting depth (assuming surface-mount, which is 99.5% of the time) must be less than about 10". Also, if you make it a ported box, you will need to fit the port yourself.

As far as bracing goes, I've added some for both the satellites and the sub. However, you need to make sure that the specified bracing layout will not interfere with the driver motors or baskets (should be a simple task with a jigsaw, router, or rotary saw).

As an aside, the driver cut-outs, dimensions and internal volume of the satellites happen to match those required by the Zaph Audio ZMV5...

Disclaimer: I take no responsibility for totally screwing up your nice new sheet of MDF or for any other damages resulting from usage of this document. I have NOT tested this design yet. Do not operate power tools without adequate protection, etc.

Temporary download link: http://www.sendspace.com/file/e66ngi
  Reply With Quote


Building a 2.1 system out of a 48"x96" sheet of 3/4" MDFHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
"TECHNO"Amp building in progress-using "Iron Method" zox2003 Solid State 23 30th March 2010 08:42 PM
What makes an amplifier "bright", "warm", or "neutral"? JohnS Solid State 51 13th December 2009 06:42 PM
Building "Munny" Speakers, need advice on damping material, grill cloth... paulmurphy Parts 1 8th August 2008 06:10 AM
Some final pics of "Stacks" revisited and "Askew" with stand Andy G Multi-Way 2 3rd February 2005 06:07 AM
Anyone used Scan-Speak's "Flow Resistors" or "Aperiodic Vents"? Ignite Multi-Way 3 18th November 2001 08:42 AM

New To Site? Need Help?

All times are GMT. The time now is 04:39 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio