Panasonic (National) EAS-5PH18S
6 ohm
2" paper cone
"Japan 713(c)"
Can anyone share an opinion on the quality of these tweeters? I have two that came to me as 2-ways, crossed with an 8" WR, using a 2.2uF series cap.
(Looking for a helper tweeter for a Sanyo "103" clone.)
Thanks
PS It'd also be helpful if someone knows their sensitivity.
6 ohm
2" paper cone
"Japan 713(c)"
Can anyone share an opinion on the quality of these tweeters? I have two that came to me as 2-ways, crossed with an 8" WR, using a 2.2uF series cap.
(Looking for a helper tweeter for a Sanyo "103" clone.)
Thanks
PS It'd also be helpful if someone knows their sensitivity.
Brisso, FWIW I've found that most Matushita (now Panasonic) drivers (they all seem to start with 'EAS") are a cut above most roadkill drivers I've collected...
I measured a panasonic tweeter recently and it had a flat response from 4Khz up, sorry, it's back in the box now so can't tell you the model no.
I measured a panasonic tweeter recently and it had a flat response from 4Khz up, sorry, it's back in the box now so can't tell you the model no.
PeteMcK said:Brisso, FWIW I've found that most Matushita (now Panasonic) drivers (they all seem to start with 'EAS") are a cut above most roadkill drivers I've collected...
I measured a panasonic tweeter recently and it had a flat response from 4Khz up, sorry, it's back in the box now so can't tell you the model no.
Hi Pete,
Here's a pic of the Panasonic tweeters. Recognise them?
Doug
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.