Here are the frequency and impedance measurements from the top midwoofer / tweeter portion of Devin's psuedo-Aethers using the Peerless poly woofers but a Dayton "Silkie" DC28F tweeter.
I've been playing w/LspCAD some, will post .LSP file later this weekend.
Anybody want to plug these files in and see what you can come up with?
I've been playing w/LspCAD some, will post .LSP file later this weekend.
Anybody want to plug these files in and see what you can come up with?
Attachments
Oh, I should say they're measured from 1m centered on tweeter.
The design is similar/based on these: http://undefinition.googlepages.com/diy-aethers
It's strange they seem to have the opposite of "baffle step"
Here is a graph of the raw Mid and Tweeter responses:
EDIT: Measurement taken in ARTA, "Dual Gated" merged FR - but, I suppose I should have measured the bass from nearfield and manually merged?
The design is similar/based on these: http://undefinition.googlepages.com/diy-aethers
It's strange they seem to have the opposite of "baffle step"
Here is a graph of the raw Mid and Tweeter responses:
EDIT: Measurement taken in ARTA, "Dual Gated" merged FR - but, I suppose I should have measured the bass from nearfield and manually merged?
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.