Fostex Wooden Horn H400 and D1400 Driver

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Does anyone have any experience with the Fostex H400 horn and D1400 1" driver?

Sound quality, x-over points, etc

H400.jpg


.
An externally hosted image should be here but it was not working when we last tested it.


The horn is fairly affordable. $489 at Madisound.

Is the D1400 driver up to par today? Compared to other 1" such as B&C, Eighteen Sound, BMS, Radian, RCF, Beyma, etc. I'm not that experienced in the driver field.

I was think a box something like this with PHL 12":

Horn.jpg


Thank you,
 
Hi,

here is some info: http://www.soundworks-pa-shop.de/po...gID=2&XTCsid=e0a34aaea4f27c160e9b79dc7847d229

(oh well, it was posted already :smash: )

Recommended crossover seems to be "higher than" 750Hz, I had a similar combination from RCF and -I- would crossover them at 1000Hz + , if passive. It depends on your desired maximum volume level too. BTW the amount of fostex 1" drivers sold on ebay with blown voice coils speaks for itself imho.

-Micha
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.