diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Multi-Way (http://www.diyaudio.com/forums/multi-way/)
-   -   B & C DE250 assembly (http://www.diyaudio.com/forums/multi-way/128246-b-c-de250-assembly.html)

Ed LaFontaine 17th August 2008 01:59 PM

B & C DE250 assembly
 
I'm looking for some assurance that I can take a DE250 apart and put it back together without screwing it up.

I want to see the throat better in order to consider fixtures for waveguide construction and alignment.

TIA

mpmarino 17th August 2008 02:30 PM

Mongo,

We are on the same page, except I'll be looking at my Altec 902s in the near future. I'd rather not take the thing apart but....:xeye:

Good luck! :cannotbe:

Rybaudio 17th August 2008 06:34 PM

I can't speak for the DE250, but I've taken apart a DE200 to repair a broken phase plug. The big issue is voice coil alignment and with the DE200 that is taken care of by a metal ring attached to the coil/dome assembly that fits into a lip in the front plate. It was quite straightforward to take it apart and put it back together and it now works fine. I have to imagine the DE250 is similar.

badman 18th August 2008 03:56 PM

most compression drivers
 
most compression drivers have alignment features so that replacement diaphragms are easily field serviceable.


All times are GMT. The time now is 11:12 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2