Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

To sperate or not to sperate
To sperate or not to sperate
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 18th March 2003, 08:42 AM   #1
ir33t is offline ir33t  Australia
diyAudio Member
 
Join Date: Mar 2003
Location: Melbourne, Australia
Default To sperate or not to sperate

I'm about to construct a seal enclosure for a 3 way system.

I'm conserned that the presure effect from the woofer is going to do 'bad things' to my midrange woofer and tweeter.

I'm thinking sperating the woofer from the rest of the system with a divider so that there is no "air" contact with the other drivers.

Doing this i can also 'tune' the size of the woofer enclosure to what the manufactuers recomend.

Is this a good or bad idea? help please!!!
  Reply With Quote
Old 18th March 2003, 07:28 PM   #2
pinkmouse is offline pinkmouse  Europe
diyAudio Moderator
 
pinkmouse's Avatar
 
Join Date: Apr 2002
Location: Rotherham, England
To sperate or not to sperate
hi irt33

Yes, you should build separate compartments for each driver, or as you say, the pressure wave will cause problems.
__________________
Rick: Oh Cliff / Sometimes it must be difficult not to feel as if / You really are a cliff / when fascists keep trying to push you over it! / Are they the lemmings / Or are you, Cliff? / Or are you Cliff?
  Reply With Quote
Old 18th March 2003, 09:11 PM   #3
ir33t is offline ir33t  Australia
diyAudio Member
 
Join Date: Mar 2003
Location: Melbourne, Australia
is this done in most speaker systems?

also...

The woofer is 4ohm
the mid is 8ohm
the tweet is 8ohm

whats the best way to connect them my amp dosn't like 2ohm loads.
  Reply With Quote
Old 19th March 2003, 02:51 AM   #4
BAM is offline BAM
diyAudio Member
 
Join Date: Sep 2001
Location: Carmel, IN; West Lafayette, IN
Send a message via AIM to BAM
use a proper crossover network. The lowest load the amplifier will see is the 4 ohms from the big woofer.

If you thought you could get away without a crossover, sorry. You will fry your tweeter if you send it a bunch of low frequencies. Each driver doesn't just filter out its band of frequencies on its own
  Reply With Quote
Old 19th March 2003, 03:29 AM   #5
redrumjoe666 is offline redrumjoe666
diyAudio Member
 
Join Date: Dec 2002
Location: San Jose, CA
While your at it, you might also think about constructing separate cabinets for the woofers and the other drivers, not just separate compartments.

-Joe
  Reply With Quote
Old 19th March 2003, 06:44 AM   #6
ir33t is offline ir33t  Australia
diyAudio Member
 
Join Date: Mar 2003
Location: Melbourne, Australia
sounds like a good idea with the sperate boxes but i would like to keep this simple and easy

Here are links to the drivers i would like to use, i know they are not brand name as such but have a look and tell me what you think.

The 8" woofer is the same exept a 4ohm version, i'm useing it as i already have them.

http://www1.jaycar.com.au/productVie...=&SUBCATID=434



http://www1.jaycar.com.au/productVie...=&SUBCATID=418






http://www1.jaycar.com.au/productVie...=&SUBCATID=383
  Reply With Quote
Old 19th March 2003, 08:46 AM   #7
planet10 is offline planet10  Canada
frugal-phile(tm)
diyAudio Moderator
 
planet10's Avatar
 
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
To sperate or not to sperate
That Jaycar mid has its own sealed enclosure, as does the tweeter (which looks a lot like a set of VIFAs i have) so there is no need for you to build separate enclosures for them. The metal basket on the mid should get a layer of ductseal (or equivalent) on it to kill ringing.

dave
__________________
community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi
p10-hifi forum here at diyA
  Reply With Quote

Reply


To sperate or not to sperateHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


New To Site? Need Help?

All times are GMT. The time now is 09:35 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki