|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Oct 2007
Location: melbourne
|
hi all im about to start a project similar to tony gees andromneda i have the following drivers which i could use as the top 2way enclosure .scanspeak 18w 8531goo revelater ,scan 12m revelater mids and scan r2904/7000 ringradiater tweets .im thinking of using the 18w and the r2904 for the top cab which will be a simple 2way system , or i could substitute the 18w for a 12 m rev if that would wortk better .the bottom cabs will house the focal 13wx audiom for subs .id like some oppinions on if this combo would be a good match ,or any other advice i can get cheers
|
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Feb 2004
Location: Chinook Country.Alberta
|
that using the 18w 8531goo, and the Focal sub would allow you to use the basic cross over as Tony Glee does. You may have to alter the tweeter section though....do you already own the Revelator tweeters? If not can you access the Focals?
Then just follow the recipe. stew
__________________
stew ☮ -"A sane man in an insane world appears insane." |
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Oct 2007
Location: melbourne
|
hi mate ive already got all the revelater drivers from a ekta grande project i built a while ago so i wanted to use them. they are a little different from tony gees design though .i also cant get the focal 13kx anymore as they dont make them but i can get 2 new focal 15wx audiuom drivers here in aus so im going to have to modify the crossovers to suit and use a bigger lower cab for the bass drivers .im hoping the focals will crossover nice with the 18w revs .im hoping someone who has used these drivers could advise me on the crossover setup cheers
|
|
|
|
|
#4 |
|
diyAudio Member
|
Hi
What was wrong with the Ekta Grande project? |
|
|
|
|
#5 |
|
diyAudio Member
Join Date: Oct 2007
Location: melbourne
|
hi all the ekta grande is a very nice speaker i cant fault the sound its very nice but im itching for a new project and im interested in the sound from the bigger drivers
|
|
|
|
|
#6 |
|
diyAudio Member
Join Date: Mar 2006
Location: Brno
|
SLR > could you elaborate more on your Ektas Grande. What are your experiences from built. I am just curious because currently I work on my Ektas Grande.
Thank you |
|
|
|
|
#7 |
|
diyAudio Member
Join Date: Oct 2007
Location: melbourne
|
hi mate the ekta grande is a very reveali9ng speaker with very powerfull bass the midrange is perhaps a little forward but this will depend on your room . my room is very live sounding with catheadral ceilings and in this situation the ekta grandes midrange is a little over done but in a more damped room it would be perfect . the imaging on these speakers is superb . ive tried both the vifa and revelater tweet and the r2904/7000 is worth the extra dollars in short they are a magnificent speaker .
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| First project. Need advice and help! | elnewb | Chip Amps | 4 | 6th August 2009 10:51 AM |
| Please advice me on this project | basstard | Multi-Way | 16 | 27th July 2008 01:22 PM |
| Would appreciate some advice on amp project | PJN | Solid State | 2 | 12th February 2008 05:52 PM |
| My DIY Project - Advice VERY Welcome! | ben_scammell | Multi-Way | 1 | 23rd September 2005 06:59 PM |
| New project - need advice, please. | conscious | Multi-Way | 0 | 2nd January 2005 08:21 PM |
| New To Site? | Need Help? |
| Page generated in 0.08813 seconds (78.61% PHP - 21.39% MySQL) with 10 queries |