Usher suppliers in / near Australia?

Dave Bullet · 20th June 2008, 11:40 PM

Hi there,

Does anyone have any details for Usher driver suppliers in / around Australia?

Shipping a pair of 8945P's will set me back USD$164 to NZ - so looking for something closer to home.

Thanks,
David.

Andy G · 20th June 2008, 11:50 PM

I haven't found one.

maybe an opportunity for someone ?? (I'm a Uni student, don't look at me )

ttan98 · 21st June 2008, 07:55 AM

Hi,

I bought mine* from a distributor of all places in Indonesia, cheaper than PE. They arrived promptly, if you are game enough leave a message here I will advise you the details, Or I can sell you both if you are interested.

cheers.

* 8945 and complementary tweeter cannot remember part no. the combo sounds very good.

Dave Bullet · 21st June 2008, 08:14 AM

Hi ttan98,

Have you bought much through the distributor in question? I would be interested in making contact in any case to work out if cheaper than from USA.

Thanks,
David.

ttan98 · 21st June 2008, 09:12 AM

Quote:

Originally posted by Dave Bullet
Hi ttan98,

Have you bought much through the distributor in question? I would be interested in making contact in any case to work out if cheaper than from USA.

Thanks,
David.

Yes, I bought from them. Total price is ABOUT AUD$320 plus postage for 2 woofers and 2 tweeters.
Indonesia is closer hence postage is cheaper. I trusted them it is up to you whether you trust them or not.

details: balance_audio@yahoo.com

otto88 · 21st June 2008, 09:15 AM

Hi

I have a pair of new Usher 8945A's that I might part with.
the TS are:

Fs 38
Re 5.8
Qms 2.0
Qes 0.37
Sd 150
Vas 34
Xmax 6.0
(Le) 0.4

I'm "across the pond" in Melbourne

rick5757 at gmail.com

Cheers

Dave Bullet · 21st June 2008, 07:06 PM

Hi otto / ttan,

Thanks for the replies - and thanks for the offer otto. I'm still deciding on a tweeter and enclosure alignment. I'm probably more interested in the A version as well (greater Sd over the phase plug version). When I've finalised a design, I'll let you know.

Thanks,
David.

20th June 2008, 11:40 PM	#1
Dave Bullet diyAudio Member Join Date: Jan 2002 Location: Wellington, New Zealand	Usher suppliers in / near Australia? Hi there, Does anyone have any details for Usher driver suppliers in / around Australia? Shipping a pair of 8945P's will set me back USD$164 to NZ - so looking for something closer to home. Thanks, David.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Usher tweeter suppliers	Theli	Multi-Way	2	27th February 2007 07:40 PM
opamp suppliers in Australia	soundfan	Digital Source	8	25th January 2006 10:31 AM
Speaker driver suppliers in Australia	hifipenguin	Multi-Way	11	12th April 2005 03:43 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th June 2008, 11:50 PM	#2
Andy G diyAudio Member Join Date: Apr 2002 Location: Newcastle, Australia	I haven't found one. maybe an opportunity for someone ?? (I'm a Uni student, don't look at me )

21st June 2008, 07:55 AM	#3
ttan98 diyAudio Member Join Date: Apr 2006 Location: Melb	Hi, I bought mine* from a distributor of all places in Indonesia, cheaper than PE. They arrived promptly, if you are game enough leave a message here I will advise you the details, Or I can sell you both if you are interested. cheers. * 8945 and complementary tweeter cannot remember part no. the combo sounds very good.

21st June 2008, 08:14 AM	#4
Dave Bullet diyAudio Member Join Date: Jan 2002 Location: Wellington, New Zealand	Hi ttan98, Have you bought much through the distributor in question? I would be interested in making contact in any case to work out if cheaper than from USA. Thanks, David.

21st June 2008, 09:15 AM	#6
otto88 diyAudio Member Join Date: Dec 2007	Hi I have a pair of new Usher 8945A's that I might part with. the TS are: Fs 38 Re 5.8 Qms 2.0 Qes 0.37 Sd 150 Vas 34 Xmax 6.0 (Le) 0.4 I'm "across the pond" in Melbourne rick5757 at gmail.com Cheers

21st June 2008, 07:06 PM	#7
Dave Bullet diyAudio Member Join Date: Jan 2002 Location: Wellington, New Zealand	Hi otto / ttan, Thanks for the replies - and thanks for the offer otto. I'm still deciding on a tweeter and enclosure alignment. I'm probably more interested in the A version as well (greater Sd over the phase plug version). When I've finalised a design, I'll let you know. Thanks, David.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)