|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
21st May 2008, 03:05 PM
|
#1 |
|
diyAudio Member
Join Date: Dec 2005
Location: San Francisco
|
Speaker measurements in the SF Bay Area
Hi,
I recently completed on channel of a two way Jordan + ribbon VTL speaker. I am extremely new to speaker building (OK a few years) and have only a hacked together mic + computer measurement system. I measured the speaker but i am getting strange results (lots of bumps and dips) where i did not expect to seen any and was wondering if it is the measurement setup. Is there anyone is the San Francisco Bay Area who has a decent measurement setup who would help me take some measurements. I would of course bring the speaker over to your workshop / lab and compensate you for your time. I need a set of measurements that i can take as a firm base line. Thanks Neil |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A Test Set for Nondestructive Safe-Area Measurements | Tarzan | Solid State | 26 | 29th July 2010 03:02 AM |
| speaker measurements | kendt | Full Range | 7 | 5th February 2007 08:57 AM |
| Any experienced speaker builders in Boston area? | spwal | Swap Meet | 0 | 15th December 2006 05:51 PM |
| Speaker Tech needed in Los Angeles area | dmfraser | Multi-Way | 2 | 3rd November 2004 11:18 PM |
| any speaker diy in nevada area | zuki | Multi-Way | 2 | 8th February 2004 06:31 PM |
| New To Site? | Need Help? |
| Page generated in 0.08229 seconds (70.86% PHP - 29.14% MySQL) with 10 queries |
