Monacor Speakers Project 3-way - diyAudio
Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 5th March 2008, 10:34 AM   #1
fojica is offline fojica  Romania
diyAudio Member
 
Join Date: Nov 2007
Send a message via Yahoo to fojica
Default Monacor Speakers Project 3-way

hello to all

i want to make 3-way speakers with monacor drivers, partly because of price, partly because of availability.
i'm not decided yet over the bass speaker, but midrange and tweeter i want to use the sph-135kep and dt-109.
one ideea for bass is sph-200ke, 8", or sph-255/sph-265, 10".
another idea is to use beyma 8br40, but this one has a pretty low Bl
basically speaking, i would prefer an 8" driver since i don't have too much space in my room. anyway, maxim possible witdh for front baffle is around 32-33 cm. room is arround 18 square meters.
speakers will be used let's say "music dedicated", meaning i want a full-range system as much as possible, but not a "boomy" one (more flat/linear amplitude).

crossover frecquency 300-250 hz and 3000-3500 hz, from midrange and tweeter point of view i guess this is ok.
crossover type linkwitz-riley or maybe butterworth "adjusted" for flat amplidude, 0.7692*F(low) and 1.3*F(high). still to investigate the better option.
sph-200ke is very good regarding bass extension (low fs, low f3, moderate box volume), but seems it didn't have 90db spl as mentioned in monacor specs, more around 86db (or at least in enclosure, not free-air)....so difference between bass and midrange/tweeter will be 3db...not too optimistic.
another problem about sph-200ke is group-delay, because around 30hz it raise, doesn't matter if alignment is sbb4 or qb3. i only take bass-reflex because none of these monacor drivers seems to be good for sealed type. i'll see today how beyma simulates in sealed enclosure.

baffle step compensation and time alignment is to be checked, once drivers combination will be finally.

further simulations will follow.
any comments/sugestions are welcome.

thanks,
Tibi
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Monacor Speakers twism Swap Meet 7 7th September 2008 05:08 PM
in need of speakers project ShanaVar Full Range 24 9th February 2007 05:26 PM
monacor kep project Saki_zg Multi-Way 0 24th January 2007 08:09 PM
Monacor SPH-165KEP + DT-25N DIY project iggy888 Multi-Way 28 25th November 2006 09:29 AM


New To Site? Need Help?

All times are GMT. The time now is 01:11 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2